Read reviews (13)
Availability: In stock, leaves warehouse in 1-3 business day.
Mirror Glue from Troy Systems is the easiest way to adhere a mirror to wall. This adhesive has been specially formulated to be applied straight from the tube (no chalking gun required). Use with both standard glass mirrors and acrylic mirrors.
Contents: 5 fl oz (147.86 ml) / 1 Tube. Provides enough material for approx. 5 sq. ft. of installation coverage per tube.
Provides tight and permanent bond.
Perfect for DIY projects.
Can be used in high humidity areas (30° up to 100°F).
Environmentally friendly & low emitting material.
Low odor, non-flammable material.
Pro-grade adhesive, ideal for in-home use.
Adheres to a wide variety of surfaces: wood, drywall, cement, tile, metal, glass, and uneven surfaces.
Will not damage acrylic (glassless) mirrors.
Mildew resistant. Comes in a resealable dispenser.
Made in the USA by Troy Systems. Ships via FedEx.
Mirror glue and good customer service
Bad tube was replace at no charge with fresh tube- great customer service
Tube had lumps that clogged application of bead. Could not be applied evenly. Instructions were poor and did not include curing time. Clean-up was OK, and there were no nasty fumes.
Troy sustmes mirror glue.
In my case the glue was too old and already partially cured. I was able to use the glue in the middle of the tube, but it was a bit of a struggle.
end hard had to cut most of end off
Mastic Used on Full length hallway mirror
Used this on hallway mirror/door. The mastic is easy to use & worked perfectly. Would use again on any future projects. See my other review on the Glassless Mirror with hidden storage.
About 2 inches of adhesive was hard in tube difficult to get out
MG001 - Troy Systems Mirror Glue
Difficult and messy! When cut top of tube to apply there was a clog of dried glue. Tried to dig it out and couldn't get deep enough. Tried to squeeze it out and the bottom broke open. Eventually got it on the mirror and it stuck well.
Only been a day since installing on tile wall, but looks like it will be fine.
Troy Systems mirror glue
This glue works very well for attaching my mirrors to the wall. I would recommend this product without hesitation. The glue arrived in good time and was well packaged. Thank You.
Works as advertised
The mirror glue worked as expected
The project was to glue the mirror to another mirror. It worked without a problem. Troy systems mirror glue was easy to work with and with no mess.
The adhesive was easy to use, though there wasn't much in the way of instructions on the tube-- we had to go to the website, www.mirrorglue.com, to find proper instructions. Taking off a star for that and for high viscosity that made it a bit difficult to squeeze. Otherwise worked fine.
So far, glue is working great. As long as mirror doesn't fall down, we're good!